A G Enterprise

Type	Fire Extinguisher
Brand	FET
Capacity	35 L
Usage/Application	Industrial
Material	Mild Steel
Humidity	99% RH
Voltage	380 V
Frequency	50 Hz
Automation Grade	Automatic

Sinorix CDT (Constant Discharge Technology) is an innovative extinguishing system based on nitrogen or argon that provides constant gas discharge. As a result, the size of overpressure flaps can be reduced by up to 70 percent.

Extinguishing systems with natural agents and based on Constant Discharge Technology

Sinorix CDT is a regulated extinguishing system that uses nitrogen or argon as an extinguishing agent. It is especially suited for areas where overpressure flaps are very difficult to install. It offers effective, sustainable, and constant extinguishing. In addition, the system is safe for people, equipment and the environment.

Innovative system technology for flooding at a constant mass flow

Sinorix CDT (Constant Discharge Technology) is a regulated extinguishing system that uses nitrogen or argon as an extinguishing agent. A conventional unregulated extinguishing system follows an exponential discharge characteristic with a significant peak at the beginning of the discharge. The Sinorix CDT technology consists of a cylinder valve with a pressure-regulating function which discharges the gas into the flooding zone at constant mass flow throughout the entire flooding time. This eliminates the peak at the beginning of the discharge and thus lowers the maximum noise level. Thanks to the constant mass flow, the cross-section of the pipes can also be dimensioned smaller than with conventional unregulated extinguishing systems, and the size of the overpressure flaps can be reduced by up to 70%. Thus, Sinorix CDT is especially suited for interior or cellar rooms, where large overpressure flaps are hard to install due to structural conditions.

Sinorix CDT is applicable for both single and multi-sector systems and can be tailored for a wide range of applications. It is possible to position the cylinder battery either centrally or decentrally.

Typical applications

• Data centers and server rooms
• Telecommunication systems
• Cable ducts
• Electrical switching rooms
• Control rooms
• Technical and machine rooms